can not connect wss:xx.xx.xx.xx:8443

[tobisaki]

i tried dashbord streaming player.
but, faild to connect wss
/usr/local/FlashphonerWebCallServer/logs/server_logs/flashphoner.log
WARN WSServerHandler - WSS-pool-9-thread-4 Close channel because: javax.net.ssl.SSLException 'Received fatal alert: unknown_ca'

please tell me, where is cert setting.

 

[Max]

You can import your certificates via Dashboard / Security / Certificates
or you can test using IP address as described here:
https://flashphoner.com/docs/wcs5/w...ide-2/index.html?quick_start_installation.htm
You have to open page https://host:8443 and accept certificates

 

[tobisaki]

Hi Max
thank soo match.

i had another problem.
at demo streaming player
home made ip-cam that speak rtsp is viewable but, some seconds after disabled.

 

[Max]

Try to add setting:
rtsp_interleaved_mode=false
into flashphoner.properties config
then do

service webcallserver restart

If it does not help, please share your RTSP cam for external connection
You can send RTSP URL to logs@flashphoner.com or here.
If you can't share IP camera, please zip and send logs and conf to the same email.

/usr/local/FlashphonerWebCallServer/logs
/usr/local/FlashphonerWebCallServer/conf

 

[tobisaki]

hi Max
thank you, grate advice.
i try at tomorrow, now sleepy in japan.

 

[tobisaki]

thank you for your help.
i tried "rtsp_interleaved_mode =false" into flashphoner.properties config and restart wcs5.
result is no good, could not viewable.

restore setting flashphoner.properties and tested its upload to next.

 

[tobisaki]

thank you for your help.
i tried "rtsp_interleaved_mode =false" into flashphoner.properties config and restart wcs5.
result is no good, could not viewable.

restore setting flashphoner.properties and tested its upload to next.

 

[Max]

We have received RTSP URL of your cam by email.
However we can't connect to your cam. It does not reply on port 8081.
Simple telnet test was failed:

telnet host 8081

Please share your cam to public and open port 8081, then we will be able to connect and check.

 

[tobisaki]

Thank you for your help.
now i set my router for dzm, all outer access to ip-cam.
can you connect? please try.

 

[Max]

It works now in VLC.
Thanks. We will test this with WCS and I will inform you about results.

 

[Max]

RTSP stream is not stable. Sometimes we are able to play it in VLC.
Sometimes it is failed. For example, right now stream is unavailable.
Please setup persistent access to the RTSP stream and make sure it is running from another external network and VLC player.

 

[tobisaki]

thank you so match for your help.
now, ip-cam use wifi at router it provided from ips(so-net nuro).
anyway, problem is network, maybe.
i try to test, variously another environment.
and i restore setting outer access.

last say more once, thank you.

 

[tobisaki]

thank you for your help.

I found another problem not a network.
ip-cam software is not compliant RFC2326.
I fixed it slightly, but maybe there are still a lot of problems.
by the way, can I ask questions of licenses here?

 

[Max]

by the way, can I ask questions of licenses here?

Sure
Please create a new thread in the General Discussion branch or write us to sales@flashphoner.com with any questions.