Can't access to WCS Manage CLI

[hqphuong]

Hi Max
My WCS version : v. 0.5.28.2747 - 5.1.3356-584520f10d3cbac576cbe67fbfadc11d2111cbb0
When i use putty to logon WCS manager CLI, it failed
1. Use ssh port 22

2. Use ssh port 2000

What wrong when i connect to WCS manager CLI?

Thanks

hqphuong

 

[Max]

WCS manager CLI is available on port 2000, not 22.
Port 22 is the standard SSH port to access Linux server, so you have to use your Linux user credentials on this port.
As for WCS manager CLI, check if WCS is started successfully as described here, then check if TCP port 2000 is listened by WCS process. If WCS started and listens the port, check if this port available from your PC as described here.

 

[hqphuong]

Hi Max
This i listened my WCS Process

From my computer, i can telnet to WCS server by port 2000

But when i use putty to connect WCS server by port 2000

it only black screen.
What wrong?
Thanks

 

[Max]

Please do the following:
1. Connect to your Linux server through SSH as you done when checking for ports listened
2. Try to enter WCS CLI with command

ssh admin@localhost -p 2000

3. Enter admin password that you have set on first logon to web interface
4. You are in WCS CLI!
If you successfully enter to CLI as described above then port 2000 is probably blocked on your PC or somewhere between your PC and your server.

 

[hqphuong]

hi Max
From Linux server through SSH, i access by admin@localhost success.

Thanks for support.
hqphuong.