Flashphoner to listen only in local IP

[mbedial]

"Hi, we are trying to configure Flashphoner to only listen on our local network. Our plan is to connect to wss via HAPROXY, which is in the same local network as our WCS.

The current configuration of our flashphoner.properties file is as follows:

ip = 10.121.120.26

ip_local = 10.121.120.26

We are using WCS as a SIP gateway for our Asterisk VoIP server.

outbound_proxy = 127.0.0.1

outbound_port = 5060

However, after restarting, the process is still listening at 0.0.0.0. What are we missing? Thank you!"

 

[Max]

Good day.
Try to set as follows:

https.address=10.121.120.26
ws.address=10.121.120.26
wss.address=10.121.120.26
client_mode=true

 

[mbedial]

Thanks a lot for your quick answer.
We've just tried with this config:

https.address=10.121.120.26
ws.address=10.121.120.26
wss.address=10.121.120.26
client_mode=true

outbound_proxy =127.0.0.1
outbound_port =5060

#webrtc ports range
media_port_from =31001
media_port_to =32000

#codecs
codecs =opus,alaw,ulaw,g729,speex16,g722,mpeg4-generic,telephone-event,h264,vp8,flv,mpv
codecs_exclude_sip =mpeg4-generic,flv,mpv
codecs_exclude_streaming =flv,telephone-event
codecs_exclude_sip_rtmp =opus,g729,g722,mpeg4-generic,vp8,mpv

#websocket ports
ws.port =9080
wss.port =9443

ws.map_custom_headers=true
ws.ip_forward_header=X-Client-IP


log4j.rootLogger=info, stdout, fAppender

And after restart:

tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 2264604/java
tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN 2264604/java

So, with these changes it seems that it doesn't consider the ports I config, but the defaults...

 

[Max]

Hello

Websocket configuration:

8080

ws.address  = 0.0.0.0

8443

wss.address = 0.0.0.0

 

[mbedial]

I think I may have explained it incorrectly earlier.
I want WCS to only listen in 10.121.120.26 and wss port 9443 and ws port 98080, How should I configure the system?
I configured it as I pasted before:

https.address=10.121.120.26
ws.address=10.121.120.26
wss.address=10.121.120.26
client_mode=true

#websocket ports
ws.port =9080
wss.port =9443

However when I check it, I have this

netstat -tulpn | grep java
tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:3478 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:554 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 127.0.0.1:50999 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:843 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:9091 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:36995 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8444 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:8445 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 127.0.0.1:45953 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:1935 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:2002 0.0.0.0:* LISTEN 2268239/java
tcp 0 0 0.0.0.0:1098 0.0.0.0:* LISTEN 2268239/java
udp 0 0 0.0.0.0:1935 0.0.0.0:* 2268239/java

We want WCS only to listen in the local IP and no in all the interfaces

BR
Mario

 

[Max]

However when I check it, I have this

This is a default WCS bindings and ports. You should restart WCS after changing the IP and listening address options

systemctl restart webcallserver

 

[mbedial]

Thanks a lot.
We always restart the service after any config change:

root@jj:/# grep ws /usr/local/FlashphonerWebCallServer/conf/flashphoner.properties
ws.address=10.121.120.26
wss.address=10.121.120.26
ws.port =9080
wss.port =9443
ws.map_custom_headers=true
ws.ip_forward_header=X-Client-IProot@jj:/# systemctl restart webcallserverroot@jj:/# netstat -tulpn | grep 9443root@jj:/#root@jj:/# netstat -tulpn | grep 8080
tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3622378/java

 

[Max]

Please check if there is no other WCS processes already running:

ps aux | grep java

If not, please provide SSH access to the server using this form.

 

[mbedial]

Thanks,
I've just sent the form with the access.
Please let me know when ou have finished in order to remove the temporal ssh account

 

[Max]

Unfortunately the instance is not available with credentials you've sent:

Please provide a correct credentials.

 

[mbedial]

Please use the password I sent with “_” at the end
Thanks a lot

 

[Max]

You should uncomment ip and ip_local settings

Also, remove the logging setting from flashphoner.properties

In this case WCS should start and listen the ports you've set

 

[mbedial]

Thnaks a lot!
It seems that now is OK.

tcp 0 0 10.121.120.26:9443 0.0.0.0:* LISTEN 3923212/java
r# netstat -tulpn | grep 9080
tcp 0 0 10.121.120.26:9080 0.0.0.0:* LISTEN 3923212/java