WCS 5.1 Failed when play RTSP camera
- Thread starter hqphuong
- Start date
Please prepare debug logs and configuration files as described here and send it to support@flashphoner.com. We will check.
When you connect to your camera, authentication work correctly. But WCS find no suported codecs in stream from your camera^
You should setup or change your camera to use it as stream source. Besides, you use WCS 5.0, not 5.1. Consider update to latest WCS version that more feature rich. Update procedure described here.
because your camera sends JPEG video, that is not supported by WCS.
You should setup or change your camera to use it as stream source. Besides, you use WCS 5.0, not 5.1. Consider update to latest WCS version that more feature rich. Update procedure described here.
Hi Max
I NAT WCS server to Internet.
From internet i can access to WCS by https://ippiblish:8888, but when i play embed player on wcs, it failed. On firewall i opened ports: 8888, 8443, 34001-35000.
from LAN Internal, i can play embed nomally.
Please check log. I sended to logs@flashphoner.com
I NAT WCS server to Internet.
From internet i can access to WCS by https://ippiblish:8888, but when i play embed player on wcs, it failed. On firewall i opened ports: 8888, 8443, 34001-35000.
from LAN Internal, i can play embed nomally.
Please check log. I sended to logs@flashphoner.com
Hello
What is your ip= settings in WCS_HOME/conf/flashphoner.properties
It should be external (internet) address of your server.
If you want to open stream in the LAN and in the WAN (internet), you have to configure:
ip={external ip}
ip_local={LAN ip}
rtc_ice_add_local_interface=true
Setting rtc_ice_add_local_interface allow to use LAN ip additionally to external IP.
Without this setting, it will work from internet only.
With this setting it should work both from internet and from LAN viewers.
What is your ip= settings in WCS_HOME/conf/flashphoner.properties
It should be external (internet) address of your server.
If you want to open stream in the LAN and in the WAN (internet), you have to configure:
ip={external ip}
ip_local={LAN ip}
rtc_ice_add_local_interface=true
Setting rtc_ice_add_local_interface allow to use LAN ip additionally to external IP.
Without this setting, it will work from internet only.
With this setting it should work both from internet and from LAN viewers.
Hello.
You wrote
As a result, playback of your stream from Internet fails because WCS tries to use ports from the setting above (31056/UDP for example).
So you should open ports 30000-32000 on firewall and forward those ports to WCS server.
You wrote
But in your WCS_HOME/conf/flashphoner.properties config file the following is set
Code:
port_from =30000
port_to =31000
media_port_from =31001
media_port_to =32000So you should open ports 30000-32000 on firewall and forward those ports to WCS server.
Hi Max
When WCS create 1 embed code. ex:
<iframe id='fp_embed_player' src='https://ipwcs:8888/embed_player?urlServer=wss://ipwcs:8443&streamName=rtsp://username
assword@ipcamera:554/onvif-stream1&mediaProviders=WebRTC,Flash,MSE,WSPlayer' marginwidth='0' marginheight='0' frameborder='0' width='50%' height='50%' scrolling='no' allowfullscreen='allowfullscreen'></iframe>
How can i encrypt ip wcs, ip camera, camera's username and password?
Thanks.
When WCS create 1 embed code. ex:
<iframe id='fp_embed_player' src='https://ipwcs:8888/embed_player?urlServer=wss://ipwcs:8443&streamName=rtsp://username
assword@ipcamera:554/onvif-stream1&mediaProviders=WebRTC,Flash,MSE,WSPlayer' marginwidth='0' marginheight='0' frameborder='0' width='50%' height='50%' scrolling='no' allowfullscreen='allowfullscreen'></iframe>How can i encrypt ip wcs, ip camera, camera's username and password?
Thanks.