Installation issue

[ruvimbom]

I have successfully installed FlashphonerWebCallServer-5.2.597 on my CentOS server by following the guidelines at https://docs.flashphoner.com/display/WCS52EN/Quick+deployment+and+testing+of+the+server. Now when I run the command

service webcallserver start

I get the error
Failed to start webcallserver.service: Unit not found. What could I have done wrong.

 

[Max]

try

cd /usr/local/FlashphonerWebCallServer/bin
sudo ./webcallserver start

it is alternative way for start/stop if it does not start as service

 

[ruvimbom]

This worked perfectly thank you. Now if I navigate to https://yourserver:8444/ I get

This page isn’t working

Error.

 

[ruvimbom]

I managed to access using the http port 8081. Testing the streamer and two-way streaming failing.

 

[Max]

Good day.

This worked perfectly thank you. Now if I navigate to https://yourserver:8444/ I get

This page isn’t working

Please check if you enter in browsers address string https://address:8444/, not http://address:8444/. Browser should display security warning if you do not imported SSL certificates yet.
Please also try to open web interface in browser incognito mode to make sure all site data are cleared.
If problem still persists please provide us access to the server to support@flashphoner.com (including link to this topic), we will check.

I managed to access using the http port 8081. Testing the streamer and two-way streaming failing.

WebRTC stream can be published only via secure connection in modern browsers.

 

[ruvimbom]

Problem solved, Thank you, sir!