SIP connectivity with opensips

OK ... by setting it to sip_add_contact_id = false solved this issue..

Can you kindly assist in how can we restrict WCS to use a fixed SIP port, currently it is using dynamic SIP ports from 30001 to onwards and on every restart it changes it... we have tried to apply the following setting but it failed.

port_from=30000
port_to=30001


Thanx
 
Please use the following settings:
Code:
port_from=30000
port_to=30002
In this case, port 30001 will be used for SIP signaling, and even ports (30000 and 30002) will not be used.
 
Hi
This setting is still rotating to sip port and not making it fixed..

port_from=30000
port_to=30002

We have installed the latrst version of WCS to ensure that we are not missing any thing.. but the issur persist...

Kindly assist
 
With the settings recommended in this post, two ports will be used for SIP signaling alternately: 30000 and 30001. The last port in range must be even, and it is never used. So two ports is the minimum you can configure.
 
Top