webrtc Stream going delay

[remo]

hello Max,

we setup webrtc stream on dedicated server. but when our client reach at 1000 so webrtc stream going to delay by 10 to 15 sec. so what is the configuration for realtime webrtc stream ?

please help me out of this


Thank you

 

[Max]

Good day.
Please read this article about a high load tuning and testing: What kind of server do you need to run a thousand WebRTC streams?

 

[remo]

Thank you for your help Max,
i do this changes in my server. now our clients are going to 1.5k to 1.7k but in flashphoner my port stats of flashphoner is like now and stream was gone

ports_media_free=0
ports_media_busy=1732
ports_media_quarantine=7659
ports_wcs_agents_free=998
ports_wcs_agents_busy=0
ports_wcs_agents_quarantine=0


please help me outof this

 

[Max]

i do this changes in my server. now our clients are going to 1.5k to 1.7k

What server configuration do you use? What is the source stream parameters? Do you test according to the method described in the article?
Usually, we do not recommend more than 2000 subscribers per one server. Also, we recommend to use a hardware dedicated server for high load, not virtual. Note that in the article we test hardware server with the following parameters:

• 2x Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz ( 24 cores, 48 threads in total);
• 192GB RAM;
• 2x 10Gbps

and the testing server has a same configuration, not lower.

 

[remo]

our server configuration is

CPU = Dual E5-2680V4 (28×2.4GHZ)
RAM = 128GB DDR4
Drive = 1 x 1TB NVME
Port = 1×10 GBPS
Bandwidth = 2 Gbps Unlimited

 

[remo]

I need 10k clients configuration which 10k is watching concurrent users.

so what is the configuration for that ?

Thank you

 

[Max]

our server configuration is

You should use the same or more powerful config for a second server which emulates viewers.

I need 10k clients configuration which 10k is watching concurrent users.

In this case you should use CDN (1 origin and 5 edge servers). Please look at this article and the technical docs.

 

[remo]

means in below configuration we can't use this server for 10k users ?

and please describe me which server for CDN and which server for EDGE servers ?

and how many users can watch stream in this configuration which i give you details ?

 

[Max]

means in below configuration we can't use this server for 10k users ?

Yes.

and how many users can watch stream in this configuration which i give you details ?

The configuration seems to be close to tested configs, so it can be used for 1000 viewers per one 720p stream

and please describe me which server for CDN and which server for EDGE servers ?

Please read the articles: 1, 2, 3, the case description.
The recommendations for a loaded origin or edge will be the same as for single server. You need 5 edge server of configuration you've tested.

 

[remo]

hello max,

we are using react exmaple but we need to set mute unmute button. so what is the code for mute unmute button for react example ?

please help me out of this


Thank you

 

[Max]

we are using react exmaple but we need to set mute unmute button. so what is the code for mute unmute button for react example ?

Use Stream.muteAudio() or Stream.muteVideo() methods to mute publishing audio/video and a corresponding unmute method: example code.
Use Stream.muteRemoteAudio() method to mute playing audio and a corresponding unmute method: example code.

 

[remo]

Thank you max,

 

[remo]

I need 30k clients configuration which 30k is watching concurrent users.

so what is the configuration for that ?

Thank you

 

[Max]

Good day.

so what is the configuration for that ?

You need a CDN (see this post) with at least 15 edge servers like mentioned above

 

[remo]

hello Max, is there any function to reconnect stream when stream will stopped due to network error or any other reason. so how can i recall steram to play when stream is available ?
i want this in react player. we are using react typescript. so please help me out of this.


Thank you

 

[Max]

Please read this doc: How to reconnect to a stream automatically.
A more complex example to restore publishing/playback: Streaming Auto Restore.