Maximun viewer using EC2

[legoodvn]

Hi there.
I am developing a livestream project with about 2000 viewer.
A. I started a insatance in AWS with max properties like CPU, bandwidth ...as my WCS server.
B. I also created another one to test my project.
I used flashphoner testing program to test maximum viewer with A. First, i presented on A, then i used B to PULL STREAM from A (set max 1000 viewer)
The problem here that i always received maximum about 300 viewers, when it reach 300 viewer, number of connecttion is lost, decrease from 300 to 1 (1 is the connection is streaming in A).
So please help me to confige it or resolve my problem.

 

[Max]

Hello

For load tests, please follow this tuning guide

Before moving to production - Web Call Server 5.2 - EN - Flashphoner Documentation

docs.flashphoner.com

Step 3 - ports

media_port_from        =20001
media_port_to          =40000

You have to extend port range to handle more streams

Step 11 - heap memory

 

[legoodvn]

So how do i confige it on AWS EC2 instance?

 

[Max]

You have to login to your AWS instance over SSH using your private key.
Then configure WCS server in the file system.

Core settings - Web Call Server 5.2 - EN - Flashphoner Documentation

docs.flashphoner.com

Settings file flashphoner.properties - Web Call Server 5.2 - EN - Flashphoner Documentation

docs.flashphoner.com

 

[legoodvn]

I configure as the link you gave me, but i still received the same result. The connection always smaller than 300 and when it reach out 300, it lost connection and down from 300 to 1 connection (1 here is streamer connection).
Please help me!

 

[Max]

Please check if you server conforms capacity recommedations. For 300 subscribers it should be at least 8 CPU, 16 Gb RAM. Note that testing server should be at least the same as tested one. Make sure also you've done tuning recommendations above and restarted server.