Publish failed from global network

Hi,

I am facing an issue while i am accessing the server from global network. The demo page says that publish failed. I have attached properties file and log file also. From local network publish stream is established successfully.

Kindly assist.

Thanks
MA
 

Attachments

Good day.
If your server is in LAN behind the NAT, the media traffic ports range (31001-32000/UDP and TCP by default) on the server must be accesible from external network. Please check your router configuration to set up media port forwarding to WCS server.
Please read details here.
 
Hi,
This entry is already configured in the router. But still same error. See the attached screen shot.

Thanks
MA
 

Attachments

  • Screenshot_20200915-092340_AnyDesk.jpg
    Screenshot_20200915-092340_AnyDesk.jpg
    93.8 KB · Views: 522
We checked your server.
Please set ip parameter to external IP address, in this case streaming will work:
1600151632950.png

Code:
ip=110.xxx.xxx.xxx
ip_local=192.168.xxx.xxx
(we hide some octets for your security)
 
Hi,
I have attached the flashphoner.properties file earlier. It has the same setting as you are recommending but in video chat demo.. one from lan side and from external side. Lan side successfully publishes but external wan side fails.

Please see the attached screenshot

Thanks
Ma
 

Attachments

  • 20200915_115035.jpg
    20200915_115035.jpg
    171.3 KB · Views: 554
It has the same setting as you are recommending but in video chat demo.. one from lan side and from external side. Lan side successfully publishes but external wan side fails.
As we see, your server still have local ip set as external:
1600153859830.png

Please correct the settings as we recommended above
 
Top